Ваша заявка принята!
Наш менеджер свяжется с Вами
в течение 2 минут!
Рабочее время 8:00-17:00 (МСК)
Hot water boiler GEOTHERM WMB 0,63
Краткое описание товара
Характеристики
*характеристики оборудования являются типовыми и могут изменяться при проектировании- Heating capacity, kW 630
- Температура воды на выходе из котла, c◦ 95
- Температура воды на входе в котел, c◦ 70
- Boiler efficiency, natural gas, % 92,6
- Расход топлива, природный газ, Н·м³/ч 78,5
- Температура уходящих газов, природный газ, c◦ 155
- Аэродинамическое сопротивление котла (без горелки), Па 60
- Гидравлическое сопротивление, Мпа 0,08
- Расчетное давление воды на входе, МПа 0,7
- Расход воды через котел, т/ч 21,6
- Удельный выброс оксидов азота, природный газ, г/м³ 0,08
- Диапазон регулирования, % 30-100
- Масса котла (без горелки, без воды), кг 4000
- Водяной объем котла, м³ 0,7
- Площадь поверхности нагрева, м² 57
- Boiler efficiency, fuel oil, % 91,4
- Расход топлива, мазут, кг/ч 63,7
- Температура уходящих газов, мазут, c◦ 182
- Удельный выброс оксидов азота, мазут, г/м³ 0,26
Select an equipment
Specifications
| Specifications | Units of phys. qt | Standard size | ||
| Boiler type | 0,63 | |||
| Heating capacity | kW | 630 | ||
| Water temperature | at the exit of the boiler | ◦С | 95 | |
| at the entrance to the boiler | 70 | |||
| EC (efficiency coefficient) of boiler | Natural gas | % | 92,6 | |
| fuel oil | 91,4 | |||
| Fuel consumption | Natural gas | Nm3/h | 78,5 | |
| fuel oil | kg/h | 63,7 | ||
| Exhaust gas temperature | Natural gas | ◦С | 155 | |
| fuel oil | 182 | |||
| Aerodynamic resistance of the boiler (without burner) | Pa | 60 | ||
| Hydraulic resistance | MPа | 0,08 | ||
| Design water pressure at the inlet | MPа | 0,7 | ||
| Water flow through the boiler | t/h | 21,6 | ||
| Specific emission of nitrogen oxides | Natural gas | g/m³ | 0,08 | |
| fuel oil | 0,26 | |||
| Adjustment range | % | 30-100 | ||
| Boiler weight (without burner, without water) | kg | 4000 | ||
| Water volume of boiler | m³ | 0,7 | ||
| Heating surface area | m² | 57 | ||
PRODUCT DESCRIPTION
GEOTHERM ® WMB series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.
GEOTHERM ® WMB series boilers are produced with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.
GEOTHERM ® WMB series boilers are produced with a capacity from 0.63 to 35.0 MW.
The fundamental difference between the GEOTHERM ® WMB series boilers and the GEOTHERM WGB(3P); GEOTHERM WGB(P); GEOTHERM WGB(V) series boilers is that an intermediate collector is provided in the pipe system and niches for ash removal are located under the convective part. An intermediate collector is necessary to increase the pitch in the convective surface, this avoids clogging of the convective surface with fuel oil. The niches are designed to remove ash residue that forms on the convective surface during the combustion of fuel oil. The main advantage of boilers of this series is that they can run on fuel oil.
The main components of the GEOTHERM ® WMB series boilers:
-
Collector frame - serves to distribute water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.
-
The convective section is the main part of the boiler pipe system.
-
The support frame serves as the base for the installation of the boiler pipe system.
-
Stiffness belt - serves as a frame to ensure the rigidity of the boiler.
- The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases.
Geotherm hot water boiler WMB 0.63 the main type of fuel is fuel oil, the reserve fuel is natural gas the main difference of the fuel oil boiler is that an intermediate collector is provided in the pipe system and niches are located under the convective part to remove ash residue.
