Ваша заявка принята!
Наш менеджер свяжется с Вами
в течение 2 минут!
Рабочее время 8:00-17:00 (МСК)
Hot water boiler GEOTHERM WGB (P) 23,26
Краткое описание товара
Характеристики
*характеристики оборудования являются типовыми и могут изменяться при проектировании- Heating capacity, kW 23260
- Температура воды на выходе из котла, c◦ 110 / 150
- Температура воды на входе в котел, c◦ 70 / 70
- Boiler efficiency, natural gas, % 94,7 / 93,9
- Boiler efficiency, diesel fuel, % 92,5 / 92,1
- Расход топлива, природный газ, Н·м³/ч 2455 / 2471
- Расход топлива, дизельное топливо, кг/ч 2132 / 2139
- Температура уходящих газов, природный газ, c◦ 138 / 151
- Температура уходящих газов, дизельное топливо, c◦ 176 / 183
- Аэродинамическое сопротивление котла (без горелки), Па 650 / 655
- Гидравлическое сопротивление, Мпа 0,11 / 0,15
- Расчетное давление воды на входе, МПа 0,9 / 1,6
- Расход воды через котел, т/ч 500 / 250
- Удельный выброс оксидов азота, природный газ, г/м³ 0,08 / 0,08
- Удельный выброс оксидов азота, дизельное топливо, г/м³ 0,16 / 0,16
- Диапазон регулирования, % 30-100 / 30-100
- Масса котла (без горелки, без воды), кг 31500 / 31500
- Водяной объем котла, м³ 5,7 / 5,5
- Площадь поверхности нагрева, м² 798 / 798
Select an equipment
Specifications
| Specifications | Units of phys. qt | Standard size | ||
| Boiler type | 23,26 | |||
| Heating capacity | kW | 23260 | ||
| Water temperature | at the exit of the boiler | ◦С | 110 | 150 |
| at the entrance to the boiler | 70 | 70 | ||
| EC (efficiency coefficient) of boiler | Natural gas | % | 94,7 | 93,9 |
| diesel | 92,5 | 92,1 | ||
| Fuel consumption | Natural gas | Nm3/h | 2455 | 2471 |
| diesel | kg/h | 2132 | 2139 | |
| Exhaust gas temperature | Natural gas | ◦С | 138 | 151 |
| diesel | 176 | 183 | ||
| Aerodynamic resistance of the boiler (without burner) | Pa | 650 | 655 | |
| Hydraulic resistance | MPа | 0,11 | 0,15 | |
| Design water pressure at the inlet | MPа | 0,9 | 1,6 | |
| Water flow through the boiler | t/h | 500 | 250 | |
| Specific emission of nitrogen oxides | Natural gas | g/m³ | 0,08 | 0,08 |
| diesel | 0,16 | 0,16 | ||
| Adjustment range | % | 30-100 | 30-100 | |
| Boiler weight (without burner, without water) | kg | 31500 | 31500 | |
| Water volume of boiler | m³ | 5,7 | 5,5 | |
| Heating surface area | m² | 798 | 798 | |
PRODUCT DESCRIPTION
GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.
GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.
Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW.
The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.
Main components of GEOTHERM ® WGB (P) series boilers:
-
Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.
-
The convective section is the main part of the boiler pipe system.
-
The support frame serves as the base for the installation of the boiler pipe system.
-
Stiffness belt - serves as a frame to ensure the rigidity of the boiler.
- The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases.
Hot water boiler GEOTHERM WGB (P) 23.26 is produced and delivered to the facility in a block design, operates in two temperature modes, the temperature at the outlet of the boiler reaches 150°C.
