Ваша заявка принята!
Наш менеджер свяжется с Вами
в течение 2 минут!
Рабочее время 8:00-17:00 (МСК)
Hot water boiler GEOTHERM WGB (P) 2,5
Краткое описание товара
Характеристики
*характеристики оборудования являются типовыми и могут изменяться при проектировании- Heating capacity, kW 2500
- Температура воды на выходе из котла, c◦ 95 / 110
- Температура воды на входе в котел, c◦ 70 / 70
- Boiler efficiency, natural gas, % 94,3 / 94,7
- Boiler efficiency, diesel fuel, % 92,3 / 92,5
- Расход топлива, природный газ, Н·м³/ч 265 / 265
- Расход топлива, дизельное топливо, кг/ч 229 /230
- Температура уходящих газов, природный газ, c◦ 127 / 130
- Температура уходящих газов, дизельное топливо, c◦ 162,5 / 165,5
- Аэродинамическое сопротивление котла (без горелки), Па 97 / 105
- Гидравлическое сопротивление, Мпа 0,13 / 0,14
- Расчетное давление воды на входе, МПа 0,7 / 0,9
- Расход воды через котел, т/ч 86 / 47,8
- Удельный выброс оксидов азота, природный газ, г/м³ 0,08 / 0,08
- Удельный выброс оксидов азота, дизельное топливо, г/м³ 0,16 / 0,16
- Диапазон регулирования, % 30-100 / 30-100
- Масса котла (без горелки, без воды), кг 4500 / 4500
- Водяной объем котла, м³ 0,6 / 0,6
- Площадь поверхности нагрева, м² 135,2 / 133,4
Select an equipment
Specifications
| Specifications | Units of phys. qt | Standard size | ||
| Boiler type | 2,5 | |||
| Heating capacity | kW | 2500 | ||
| Water temperature | at the exit of the boiler | ◦С | 95 | 110 |
| at the entrance to the boiler | 70 | 70 | ||
| EC (efficiency coefficient) of boiler | Natural gas | % | 94,3 | 94,7 |
| diesel | 92,3 | 92,5 | ||
| Fuel consumption | Natural gas | Nm3/h | 265 | 265 |
| diesel | kg/h | 229 | 230 | |
| Exhaust gas temperature | Natural gas | ◦С | 127 | 130 |
| diesel | 162,5 | 165,5 | ||
| Aerodynamic resistance of the boiler (without burner) | Pa | 97 | 105 | |
| Hydraulic resistance | MPа | 0,13 | 0,14 | |
| Design water pressure at the inlet | MPа | 0,7 | 0,9 | |
| Water flow through the boiler | t/h | 86 | 47,8 | |
| Specific emission of nitrogen oxides | Natural gas | g/m³ | 0,08 | 0,08 |
| diesel | 0,16 | 0,16 | ||
| Adjustment range | % | 30-100 | 30-100 | |
| Boiler weight (without burner, without water) | kg | 4500 | 4500 | |
| Water volume of boiler | m³ | 0,6 | 0,6 | |
| Heating surface area | m² | 135,2 | 133,4 | |
PRODUCT DESCRIPTION
GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.
GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.
Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW.
The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.
Main components of GEOTHERM ® WGB (P) series boilers:
-
Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.
-
The convective section is the main part of the boiler pipe system.
-
The support frame serves as the base for the installation of the boiler pipe system.
-
Stiffness belt - serves as a frame to ensure the rigidity of the boiler.
- The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases.
GEOTHERM GB (P) 2,5 hot water boiler can be used in open heat supply systems, for heating industrial and residential buildings.
