ENG
ENG

GEOTHERM WGB (P) 40

Specifications

Specifications Units of phys. qt Standard size
Boiler type 40
Heating capacity kW 40000
Water temperature at the exit of the boiler ◦С 150
at the entrance to the boiler 70
EC (efficiency coefficient) of boiler Natural gas % 93,1
diesel 91,8
Fuel consumption Natural gas Nm3/h 4228
diesel kg/h 3656
Exhaust gas temperature Natural gas ◦С 155
diesel 191
Aerodynamic resistance of the boiler (without burner) Pa 2000
Hydraulic resistance MPа 0,1
Design water pressure at the inlet MPа 1,6
Water flow through the boiler t/h 430
Specific emission of nitrogen oxides Natural gas g/m³ 0,08
diesel 0,16
Adjustment range % 30-100
Boiler weight (without burner, without water) kg 34500
Water volume of boiler 6,1
Heating surface area 1024

PRODUCT DESCRIPTION

GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.

GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.

Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW.

The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.



Main components of GEOTHERM ® WGB (P) series boilers:

  • Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.

  • The convective section is the main part of the boiler pipe system.

  • The support frame serves as the base for the installation of the boiler pipe system.

  • Stiffness belt - serves as a frame to ensure the rigidity of the boiler.

  • The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases. 
Hot water boiler GEOTHERM WGB (P) 40 The main fuel of this boiler is natural gas, the reserve fuel is diesel fuel. For ease of installation and transportation, the boiler is delivered to the facility in separate blocks.