GEOTHERM WGB (P)
GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.
GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.
GEOTHERM ® WGB (P) series boilers are produced with a capacity from 0.63 to 58.2 MW.
The fundamental difference between the boilers of the GEOTHERM ® WGB (P) series from the boilers of the GEOTHERM WGB(3P); GEOTHERM WMB; GEOTHERM WGB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.
The advantages of boilers of this series are:
-
High efficiency of boilers.
-
Gas-tight design.
-
Low NOx emissions
-
Quick access to the set operating mode.
-
Reliable and simple design.
-
Modern design.
-
The possibility of using boilers in open heat supply schemes.
-
Block hold loading and delivery.
-
Wide standard-size range from 0.63 to 58.2 MW.
-
The use of boilers with burners from leading European and Russian manufacturers.
-
Low hydraulic resistance.
-
Simple repair.
Main components of GEOTHERM ® WGB (P) series boilers:
-
Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.
-
The convective section is the main part of the boiler pipe system.
-
The support frame serves as the base for the installation of the boiler pipe system.
-
Stiffness belt - serves as a frame to ensure the rigidity of the boiler.
- The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases.