Select an equipment What is a Waste Sorting Complex? What is an incinerator?
    +7 499 322-05-90
ENG
ENG

GEOTHERM WGB (P) 0,63

GEOTHERM WGB (P) 0,63
GEOTHERM WGB (P) 0,63
GEOTHERM WGB (P) 0,63
GEOTHERM WGB (P) 0,63
GEOTHERM WGB (P) 0,63
GEOTHERM WGB (P) 0,63

Specifications

Specifications
 Units of phys. qt Standard size
Boiler type
 0,63
Heating capacity
 kW
 630
Water temperature
 at the exit of the boiler
 ◦С 95
at the entrance to the boiler
 70
EC (efficiency coefficient) of boiler
 Natural gas
 % 92,6
diesel 90,5
Fuel consumption Natural gas
 Nm3/h
 67,9
diesel kg/h
 59
Exhaust gas temperature Natural gas ◦С 135,5
diesel 174
Aerodynamic resistance of the boiler (without burner) Pa
 59
Hydraulic resistance MPа
 0,06
Design water pressure at the inlet
 MPа
 0,7
Water flow through the boiler
 t/h
 21,7
Specific emission of nitrogen oxides
 Natural gas g/m³
 0,08
diesel 0,16
Adjustment range
 % 30-100
Boiler weight (without burner, without water)
 kg
 2000
Water volume of boiler
 m³
 0,4
Heating surface area
 m²
 54,1

PRODUCT DESCRIPTION

GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.

GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.

Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW.

The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.


Main components of GEOTHERM ® WGB (P) series boilers:

  • Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.

  • The convective section is the main part of the boiler pipe system.

  • The support frame serves as the base for the installation of the boiler pipe system.

  • Stiffness belt - serves as a frame to ensure the rigidity of the boiler.

  • The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases.