Select an equipment What is a Waste Sorting Complex? What is an incinerator?
    +7 499 322-05-90
ENG
ENG

GEOTHERM WGB (P) 11,63

GEOTHERM WGB (P) 11,63
GEOTHERM WGB (P) 11,63
GEOTHERM WGB (P) 11,63
GEOTHERM WGB (P) 11,63
GEOTHERM WGB (P) 11,63
GEOTHERM WGB (P) 11,63

Specifications

Specifications
 Units of phys. qt
 Standard size
Boiler type
 11,63
Heating capacity
 kW 11630
Water temperature at the exit of the boiler
 ◦С 95
 110 
 150
at the entrance to the boiler
 70
 70
 70
EC (efficiency coefficient) of boiler Natural gas % 93,9 94,6  93
diesel 91,7  92,5 
 91,9
Fuel consumption
 Natural gas Nm3/h 1235,6 1231  1247
diesel kg/h 1073
 1066,7  106
Exhaust gas temperature Natural gas ◦С 140
 131,5  170
diesel 179
 166,7  190
Aerodynamic resistance of the boiler (without burner)
 Pа
 615 625 
 640
Hydraulic resistance
 MPа 0,132 0,07 
 0,1
Design water pressure at the inlet
 MPа 0,7 0,9 
 1,6
Water flow through the boiler
 t/h
 400 250  125
Specific emission of nitrogen oxides
 Natural gas g/m³
 0,08
 0,08 0,08
diesel 0,16
 0,16 0,16
Adjustment range
 % 30-100 30-100
 30-100
Boiler weight (without burner, without water)
 kg
 14680 15360
 15360
Water volume of boiler m³ 3,2  3,7
 3,7
Heating surface area
 m²
 360 420 
 422

PRODUCT DESCRIPTION

GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities.

GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C.

Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW.

The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface.




Main components of GEOTHERM ® WGB (P) series boilers:

  • Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping.

  • The convective section is the main part of the boiler pipe system.

  • The support frame serves as the base for the installation of the boiler pipe system.

  • Stiffness belt - serves as a frame to ensure the rigidity of the boiler.

  • The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases. 

The GEOTHERM WGB (P) 11.63 hot water boiler consists of the main components: a collector frame, a convective section, a support frame, a stiffness belt, a flue duct with an explosive valve.