Ваша заявка принята!
Наш менеджер свяжется с Вами
в течение 2 минут!
Рабочее время 8:00-17:00 (МСК)
INCINERATOR HURIKAN 1000
Availability of the State Environmental Expertise (SEE) for 4700 types of waste.
Specifications
*characteristics of equipment are typical and may change during design- In stock Yes
- The volume of main chamber (m3) 13.5
- Volume of gas afterburning chamber (m3) 13.8
- Burning rate (kg/hour) up to ~ 1000
- Dimensions (LxWxH) 12.2x2.8x5.6 m
- Boot Window (LxW) 3.88x1.87 m
- Weight (tons) 22
- Fuel type diesel/gas/fuel oil/waste oil
Select an equipment
Additional equipment
-
2969
-
Mobile Installation
2970
-
Heat recuperator
2971
-
Waste loading
2972
-
Gas cleaning system
MORE THAN 4,700 ITEMS OF WASTE FROM THE FCCO
Disposal of production and consumption waste, biological and medical, as well as oil sludge
PHOTOS
DESIGN AND CONFIGURATION OF HURIKAN 1000
Purpose
Purpose of "HURIKAN" series incinerators:
- neutralization of industrial and household waste;
- neutralization of municipal solid waste; neutralization, thermal destruction and disposal of biological waste - animal waste (cattle breeding, poultry farming, slaughterhouses, veterinary medicine, etc.) and biological waste that have lost their consumer properties;
- neutralization of medical waste of A, B, C and D categories (mercury content is not more than 0.026% of the total load mass) and medical waste that have lost their consumer properties;
- post-disaster recovery, consequences liquidation of epidemics of animal diseases;
- obtaining secondary material resources (SMR);
- heat recovery during the neutralization of waste;
- electricity generation by converting the heat received during the neutralization of waste.
Flue gas neutralization
The secondary chamber (afterburner chamber) is structurally cylindrical in shape for optimal gas distribution in the vortex flow. Due to the volume, the gas exposure in the chamber is at least 2 seconds, which ensures the neutralization of exhaust gases at high temperature (Air emission thresholds for waste incineration facilities are equivalent to Directive 2010/75/EC of the European Parliament and of the Council of 24 November 2010 on industrial emissions. Oxygen content of more than 6% ensures the neutralization of exhaust gases).
Our specialists examine the technology of equipment operation on different wastes using simulation models in order to select the optimal solution in terms of the processes occurring in the equipment.
Optionally, the secondary chamber (afterburner chamber) can be equipped with a gas monitoring system to determine maximum allowable concentration.
Monolithic lining
The combined lining of the combustion chamber consisting of an insulating ceramic plate and a monolithic concrete layer (unlike brick linings) ensures the absence of technological gaps at the junction points, which guarantees a long service life without repairs and maintenance. Due to the ceramic plate, heat is stored in the chamber, which significantly saves fuel consumption and prevents heating of the housing from the outside.
The gas afterburning chamber is lined with insulation blocks according to the European Z-BLOCK technology and mounted in a slit-free way, which ensures contact of hot gas only with the lining surface (excluding heating of mounting brackets and housing) - this guarantees a long service life.
Operation processes automation
The degree of dust and moisture protection of the control panel is IP65. The burners are controlled in automatic mode (simultaneous switching on and differentiated work modes for each when needed), setting temperatures to save fuel and control the combustion process. Display of setpoints and actual temperatures. Indication of errors and accidents. Graphic touch display, built-in archiver. Indicators for monitoring the state of burners. Monitoring the condition of temperature sensors and pressure sensors. Indication of the emergency state of the installation during exceedance of operating temperatures. Automation of waste loading and opening of the lid, message about the position of the lid of the incinerator, stopping the burners when loading waste and open the lid, blocking the lid when overloading (optional). Unit operation time counter (operating hours). Display of the current fuel level in the fuel tank. Blocking the operation of the burner at a low fuel level. Auxiliary light and sound alarm, reequipment of the control panel with heating/ventilation system, depending on the climatic conditions of the region. Remote operator control panel with multi-touch color LCD display for remote control. Application of remote access technology to the controller: control, viewing, changing data on the PLC remotely from the operator's PC.
