Ваша заявка принята!
Наш менеджер свяжется с Вами
в течение 2 минут!
Рабочее время 8:00-17:00 (МСК)
Phoenix Recyclingtech GmbH (Germany) was founded by a group of former engineers from Hammel, Arjes and Lindner, so the proposed shredder combines all the best, most advanced and most successful solutions from these companies.
Mobile shredders Phoenix Hydro Power Shredder - HPS 1.5 D have more power (by 37 kW), higher torque (by 20,000 Nm) than similar machines from other manufacturers. The Phoenix HPS 1.5 D therefore reverses much less frequently when crushing hard-to-grind materials. This not only increases the productivity of the shredder by 20-25%, but also significantly reduces the wear of the cutting shafts, gearbox and other elements of the machine.
Designed for grinding wood, industrial, domestic and bulky waste (), railway sleepers with metal spikes, tires, etc. With the help of primary grinding, a significant reduction in the volume of waste is achieved. After crushing on the discharge conveyor, the metal is separated using a magnetic separator.
mounted on a stable, reliable frame with support legs
the whole structure is entirely made in Germany with premium quality European components
massive and reliable grinding mechanism of increased strength
Drive unit:
diesel engine Scania DC 9: 294 kW
reinforced drive with increased torque for heavy duty: 260.000 Nm
hydraulic drive with automatic adjustment of the two-section pump and hydraulic motors
additional noise protection: up to 86 dB
Remote Control:
with modern multifunctional display
all menus, commands, information on the screen completely
control, management, adjustment of all parameters of the system
touchscreen control
equipped with CAN-/Bus-system, reading, control, analysis of shredder operation parameters
Control cabinet:
equipped with all necessary protection systems
integrated GPS/FMS system
mounted on the machine body
Rotors with cutters:
special knives for crushing materials that are difficult to crush, versions for solid waste, wood, metal, etc.
rotation speed adjustable 8 - 34 rpm
shaft length 1.750 mm
shaft diameter 650 mm
automatic reverse
Discharge conveyor:
Robust design with a belt width of 1.200 mm
drop height adjustable by remote control
with reinforced drive
fully galvanized, not subject to corrosion
high strength reinforced tape
Hopper:
large volume 9 m³
the process of unloading the bunkers can be started from the remote control
two tilting feed hoppers for optimal raw material supply
Remote control: