Primary shredder EcoPrimeShred 1.5

Parameter	Units of measurement	Value
Performance	t/h	up to 60
Driven>	-	- Scania DC 9 diesel engine with a power of 294 kW, a torque of 260 Nm
Width of the unloading conveyor beltn>	mm	1200
Bin volumen>	m3	9
Rotor with kniveses	-	The rotation speed is 8-34 rpm; Shaft length – 1750 mm Shaft diameter – 650 mm
Magnetic separator (optional)	-	Length – 1350 mm; Width – 650 mm; Depth – 280 mm
Equipment weight	tons	17,5n>

---

Drive:

• Scania DC 9 diesel engine: 294 kW
• additional noise protection:up to 86 dB
• hydraulic drive with automatic adjustment of two-section pump and hydraulic motors
• reinforced drive with increased torque for heavy operation: 260.000 Nm

Control panel:

• with a modern multifunctional display
• equipped with a CAN/Bus system, reading, monitoring, analysis of the shredder operation parameters
• touchscreen control
• control, management, adjustment of all system operation parameters
• all menus, commands, information on the screen are completely in RUSSIAN

Control cabinet:

• equipped with all necessary protection systems
• mounted on the machine body
• integrated GPS/ FMS system

Rotors with knives:

• special knives for crushing heavy materials, versions for solid waste, wood, metal, etc.
• The rotation speed is adjustable from 8 to 34 rpm
• shaft length 1.750mm
• shaft diameter 650 mm
  
• automatic reverse
  

Unloading conveyor:

• Robust construction with a band width of 1.200 mm
• the height of the reset is adjusted using the remote control
• with reinforced drive
• fully galvanized, not subject to corrosion
• high-strength reinforced tape

Loading funnel:

• large volume of 9 m3
• two tilting loading bins for optimal feed of raw materials
• the process of unloading bins can be started from the remote control

Remote control:

• Remote control system with 10 channels, with the function of emergency stop of the shredder